|
|
Generic gateway for LAN/TCP-IP, USB and LVTTL clock synchronous interfaces
Provides ComBlock assemblies with standard TCP-IP network connectivity and direct USB connection to host computer for both high-speed payload data transfer and monitoring and control
TCP-IP Interface:
- Role: TCP-IP server, Awaits remote client(s) connection
- Supports 3 bidirectional connections
- Maximum sustained throughput 53 Mbits/s (100Base-Tx). Actual speed depends on host computer
- Standard 100Base-Tx/10Base-T, RJ-45 connector. Autonegotiation or manual settings: 10/100 Mbit/s, full/half duplex
USB2.0 interface:
- Role: USB client
- Supports 2 bidirectional connections
- Maximum sustained throughput 85 Mbits/s (USB 2.0 High-Speed). Actual speed depends on host computer
Serial HDLC for interface between byte-wise asynchronous connections (USB, TCP-IP) and bit-serial fixed data rate connections. Support for two virtual channels when using TCP-IP
16Kbits Elastic buffering and flow-control on each transmit and receive link
Single 5V supply. Standard 40 pin 2mm dual row connectors (right, left)
|
Input |
Output |
COM-8002 High-speed data acquisition |
COM-8001 Arbitrary Waveform Generator |
All ComBlock demodulators: COM-1202, COM-1518, COM-1027, etc. |
All ComBlock modulators: COM-1402, COM-1519, COM-1028, etc. |
All ComBlock error-correction decoders: COM-1509, COM-7002, etc. |
All ComBlock error-correction encoders: COM-1509, COM-7002, etc. |
All ComBlock FPGA/ARM development platforms COM-1200, COM-1300, COM-1400, COM-1500, COM-1700, etc. |
All ComBlock FPGA/ARM development platforms COM-1200, COM-1300, COM-1400, COM-1500, etc. |
|
|