COM-1200-B FPGA DEVELOPMENT PLATFORM (Spartan-3 2000) + ANALOG

$595.00

Develop custom signal processing applications on FPGA using this generic development platform
Xilinx Spartan-3 XC3S2000-4 FPGA features 2 million system gates, 720Kbit of dual port memory, 40 dedicated 18x18 multipliers
Analog front end (AD9860) features 2 10-bit high-speed ADCs 64Msamples/s 2 12-bit high-speed DACs 64Msamples/s 2 10-bit ADCs and 3 8-bit DACs
USB 2.0 interface supports signaling rates of 480 Mbits/s (High Speed) and 12 Mbits/s (Full Speed). Typical sustained data throughputs are 85 Mbits/s (HS) and 6.5 Mbits/s (FS)
Temperature sensor
32Mb non-volatile flash memory stores up to 4 distinct FPGA configurations (3 custom + 1 fixed baseline). The selected configuration is automatically reloaded at power up or upon command within 2.2 seconds
Graphical User Interface is used for remote monitoring and control over USB. This includes loading FPGA configuration file into flash (non-volatile). FPGA configuration can also be loaded via a JTAG cable (volatile)
This module is interface compatible with other pre-programmed ComBlock modules
120 MHz maximum practical FPGA processing clock rate (typ.)
ComScope –enabled: key internal signals can be captured in real-time and displayed on host computer
Includes NGC components (software drivers) for USB 2.0/1.1 and AD9860 mixed-signals front-end
Single 5V supply with reverse voltage and overvoltage protection. Connectorized 3”x 3” module for ease of prototyping. Standard 40 pin 2mm dual row connectors (left, right, bottom)