COM-3010 [925 - 2175 MHz] Receiver

KEY FEATURES

[925 - 2175 MHz] receiver, software selectable. Designed for direct connection to an external Ka/Ku/C-band LNB over a 75 Ω coaxial cable

Sensitivity: -63 dBm RF input for full scale 10-bit output samples

Built-in RF AGC, >70 dB dynamic range

Low phase noise frequency synthesizer can be tuned over entire range by steps of 19 Hz. Performance consistent with the use of advanced modulations (n-PSK, QAM, APSK)

Automatic selection of internal / external 10 MHz frequency reference for the frequency synthesizer

Dual 10-bit Analog-to-Digital converters

User-selectable variable (105 Msamples/s max) ADC sampling rate when using external clock or fixed sampling rate:

• 40 MSamples/s (COM-3010-A)
• 100 MSamples/s (COM-3010-B)

LNB support:

• +13/+18VDC 500mA supply
• bidirectional DiSEqC control

Single 5V supply. Connectorized 3”x 3” module for ease of prototyping

ComBlock COMPATIBILITY LIST

Input	Output
C/Ku/Ka-band LNB	COM-1200 FPGA development platform, Xilinx Spartan3-2000, Tx/Rx analog front-end & USB 2.0
	COM-1400 FPGA Development Platform, Xilinx Spartan3-400 & USB2.0
	COM-1202/1203 PSK/QAM/APSK Modem, up to 22 MSymbols/s. USB 2.0 interface
	COM-1027 FSK/MSK/GFSK/GMSK demodulator
	COM-1418 Direct sequence spread-spectrum demodulator 22 Mchip/s
	COM-1008 Variable Decimation (1:1024), AGC, Pilot Tone Detection
	COM-8002 High-speed data acquisition
	COM-2001 Dual D/A converter (baseband)